Technical Performance Specs

All SeaStone Styles have the following Technical Performance Specs

Standard Sizes & Finishes (Honed recommended for interior use)
Size Thickness Finish
24″x24″ 1″ or 1.5″ Standard or Honed
18″x18″ 1″ or 1.5″ Standard or Honed
12″x24″ 1″ or 1.5″ Standard or Honed
12″x12″ 1″ or 1.5″ Standard or Honed
8″x8″ 2″ Standard or Honed
6″x12″ 1.5″ Standard or Honed
4″x4″ 1″ Standard or Honed

 

Coping and Trim Sizes
Size Thickness Finish
24″x24″ 1″ or 1.5″ Standard or Honed
18″x18″ 1″ or 1.5″ Standard or Honed
12″x24″ 1″ or 1.5″ Standard or Honed
12″x12″ 1″ or 1.5″ Standard or Honed
9″x18″ 1.5″ Standard or Honed
9″x9″ 1.5″ Standard or Honed
4″x12″ 1.5″ Standard or Honed
4″x9″ 1.5″ Standard or Honed
Counter Tops and Slabs
26″x72″ 1.5″ Standard or Honed
All Sizes are Nominal, Additional Sized available. Finish may vary by Style
Call for Availability and Customization

 

 

APPLICATIONS
Interior Spaces Exterior Spaces Swimming Pools Kitchens & Baths Enhancements Accessories Signage
Yes Yes Yes Yes Yes Yes Yes

STANDARD EDGE PROFILES

Edge Profiles

Bullnose Edge Eased Edge Beveled Edge Demi Edge

 

Installation + Maintenance

Please see our SeaStone installation and Care Summary adobe-PDF-icon

For more technical information, please see our SeaStone ASTM Testing results adobe-PDF-icon

TECHNICAL PERFORMANCE SPECS
RATING STATIC COEFFICIENT OF FRICTION
(Slip resistance.)
High This material has a high slip resistance for both wet or dry applications, with both the natural finish and the honed finish (see also ASTM Testing Results)
RATING WET DYNAMIC COEFFICIENT OF FRICTION
(Slip resistance.)
High When sealed with a penetrating sealer, this material has a high slip resistance for wet, with both the natural finish and the honed finish (see also ASTM Testing Results)
RATING ABSORPTION
(The relative porosity of a material.)
Medium Water based or solvent based penetrating sealers are recommended (see also Installation and Care data sheet)
RATING ACID SENSITIVITY
(The likelihood of a material reacting to acidic foods or liquids.)
High This material is sensitive to acid and needs to be protected with a sealer (see also Installation and Care data sheet)
RATING FREEZE-THAW
(The ability of a material to withstand freeze-thaw cycles in exterior applications.)
Passed This material is approved to use in exterior locations, sealers are recommended (see also ASTM Testing Results)
RATING COMPRESSIVE STRENGTH
High The This material is suitable for use in sand bed and mortar bed applications (see installation and ASTM Testing Results)
RATING SRI – HEAT ISLAND EFFECT
see ASTM Testing Results and LEED Evaluation Summary under Sustainability)

Sustainable surfaces in tile, stone and pavers.

Copyright © Matrix Z 2001 - 2016 - All rights reserved

 | Terms of Use |