The ReefStone style in the SeaStone Collection exhibits a finish consistent with a natural mined coral or coquina. It distinguishes itself from the rest of the style family by having a unique distressed (textured) finish.
Colors + Finishes
ReefStone is designed to be used as a mix and match product with the other styles exhibiting the same coloration used in the other styles in your choice of color base – natural white, buff or grey. The top finish is distressed adding to the natural quality of coral keystone with the exception of the trim edge face which reveals the fossil shell.
SeaStone® products are manufactured metrically, with standard thicknesses of 1” (25mm) for mortar applications and 1.5” (38mm) for mortar and/or sand bed applications. Standard mold sizes range from a nominal 12″x12″ up to 24″x24″ format; additionally, an 8” x 8” x 2”(51mm) thick paver is offered for vehicular use in sand bed applications. A range of handmade slab sizes are offered to meet certain design features.
The ReefStone style is recommended for use primarily in exterior applications due to its distressed surface and is engineered for public and private use for horizontal or vertical applications and wet and dry installations. The full line of matching edging and trim provides limitless design capabilities.
Installation + Maintenance
RECOMMENDED INSTALLATION METHODS: SeaStone 3/4” – 1” Flooring products are designed for standard industry masonry installation and installed in a manner similar to stone or marble, using comparable setting techniques. Latex modified adhesives and modified grouts are recommended to install our products per industry standards. Method of application will vary to suit the specific type of condition. We allow a minimal one eighth (1/8”) to one fourth (1/4”) joint space for joining most pieces.
Sealers are recommended before and after grout application to prevent staining. Only periodic resealing is necessary. Consult floor care product manufacturer for specific instructions and recommendations. Apply to clean and dry surfaces only. Sealers should be U/L listed as “slip resistant”. Please consult floor care product manufacturer for instructions on Polishing SeaStone after installation in order to meet the requirements of a safe walking surface of 0.5 anti-slip coefficient of friction. General aftercare requires cleaning with a neutral cleaner that has a Ph near 7 and that is free from harmful alkali, acids, etc. A non-detergent cleaner such as Spic and Span, which does not leave a soap film, may be used. We do not recommend pressure cleaning on exterior SeaStone product. Treat strains as soon as possible.
Click on the photo to enlarge photo
For more information you can consult our Technical Performance Specs or click here if you want to Order Samples.
Click on the photo to enlarge.
Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual